High quality water based new generation velvet - flat acrylic water-based paint with low VOC. Suitable designed paint for school boards. It provides a surface with excellent resistance toscratching, frequent washing and scrubbing. Erases cleanly.It dries uniformly and quickly.It has great brush ability and give a smooth flat surface. It converts surfaces into a usable chalkboard under the proper preparation.TECHNICAL CHARACTERISTICSTexture Flat <5 degrees at 85º.Specific weight 1,14 – 1,20kg/ltCovering power 11 -13m2/lt per layerDilution Up to 10% on volume with water using brushor roller and max 20% when using spray.Drying 2-3 hours touch free.Recoatability 6 hours after application or after firstlayer’s hardening. These times prolong under cold and wet weather conditions.VOC class “Interior/exterior trim and cladding paints for wood and metal” Type WB. VOC limit =130 gr/lt. Max VOC of product ready foruse= 85 gr/lt. The paint contains also solvents which are not considered as VOC.Shades Black.SURFACE PREPARATIONClean the surface of dust, oil, cropped paints, rust. Sandpaper well. Onnew surfaces it is proposed one coat of SMALTOLUX hydro MASTER PRIMER.APPLICATIONStir well. Apply 1 or 2 coats of Smaltolux Hydro Blackboard.TIPS FOR USE7 days after painting and before writing, condition the surface by rubbingthe side of a piece of a white chalk over the entire surface and erase. This will leave a coat of chalk dust that will provide the best erasability. Chalkboard can be wiped clean with a damp cloth. Wait 10 days after paintingbefore wiping it down. For better result, repeat conditioning step aftercleaning once again. The chalkboard finish is ready for use!CLEANING EQUIPMENTWhile working keep your equipment wet, either in the pot, or in the paintlauder. Strain well your tools from paint back to the pot and clean immediately with water and soap.APPLICATION CONDITIONSTemperature 8-30ºC and relative humidity lower than 80%. Contraryweather conditions may degrade paint’s quality.STORAGEStore in a cool place, protect from freezing and sun exposure. Close thecan well after application to keep in good condition. Recover unused paintfor re-use. Reuse of paint can effectively minimize the product’s life cycleenvironmental impact.